WATER QUALITY TESTER FOR POOL AND SPA

Product Overview

This Portable Pool Water Quality Tester is designed for routine monitoring of pH and chlorine levels in swimming pools, spas, and similar water systems. The dual-function design allows users to check two important water parameters with one compact handheld device.

The tester uses a connected probe and an easy-to-read analog display for convenient water testing. Its portable design makes it suitable for regular household pool maintenance without requiring a large testing system.

Key Features

Dual-Parameter Testing: Designed to measure both pH and chlorine levels in pool and spa water.

Wide pH Testing Range: Supports pH measurements from approximately 5.5 to 9.0.

Chlorine Testing: Supports chlorine measurements from approximately 0.2 to 3.0 ppm.

Analog Display: Large meter scale allows test results to be viewed directly without a digital interface.

Portable Design: Compact handheld construction is convenient for storage, carrying, and regular pool maintenance.

Flexible Probe Cable: Connected probe cable provides convenient access to water during testing.

Battery Powered: Operates with one 1.5 V AA battery.

Simple Water Testing: Suitable for routine monitoring of residential swimming pools, spas, and similar water environments.

Product Specifications

Product Name: Portable Pool pH & Chlorine Tester

Product Type: Water Quality Testing Device

Model Variant: PC102

Test Parameters: pH and Chlorine

pH Measurement Range: Approximately 5.5–9.0 pH

Chlorine Measurement Range: Approximately 0.2–3.0 ppm

Display Type: Analog Meter

Power Supply: 1 × 1.5 V AA Battery

Battery Included: No

Probe Type: External Water Testing Probe

Probe Length: Approximately 48 mm

Cable Length: Approximately 300 mm

Approximate Product Weight: 200 g

Housing Material: Plastic

Recommended Application: Swimming Pool and Spa Water Testing

The supplied product information identifies the selected PC102 version as a pH and chlorine water tester with a pH range of approximately 5.5–9.0 and a 1.5 V power supply.

The supplied instructions also list a 300 mm cable, one AA 1.5 V battery requirement, and a package containing the tester, user manual, and sandpaper.

Package Contents

1 × Portable pH & Chlorine Tester

1 × Connected Water Testing Probe

1 × User Manual

1 × Sandpaper

Battery is not included.

Recommended Use Areas

Swimming Pools

Spa Pools

Hot Tubs

Residential Pool Systems

Routine Water Maintenance

Care & Usage Instructions

• Install one compatible 1.5 V AA battery before use.
• Inspect the probe before testing and make sure the sensing area is clean.
• Place the probe into the water sample according to the operating instructions.
• Select the required testing mode for chlorine or pH.
• Allow the meter reading to stabilize before recording the result.
• Remove the probe from the water after testing.
• Rinse or wipe the probe carefully after use as appropriate.
• Do not immerse the main meter body in water.
• Keep the battery compartment dry.
• Do not expose the tester to open flames, excessive heat, or prolonged moisture.
• Store the tester in a clean, dry place when not in use.
• Use the supplied manual for calibration and maintenance procedures.
• Water Testing Reference
• Recommended pool and spa conditions may vary depending on the specific water system, maintenance method, and local guidance.
• The supplied product information references approximately 1.2–1.7 ppm for chlorine and approximately 7.2–7.8 pH as example pool and spa target ranges.
• This product is intended as a routine water-monitoring tool and should be used according to the supplied operating instructions.